According to the specs, you have an Intel i7 CPU in a socket LGA 1366. You need a fan compatible with that socket and rated for that CPU. The fan has an electrical connector to the mainboard that must be unplugged, then there are four spring-loaded locking screws that must be undone to lift the fan off the CPU. The replacement fan, if new, should already have thermal transfer compound on it.

Acer aspire predator g7710 -u7790a gaming desktop computer tower in electric orange only used a handful of times - practically new this is a very cool machine.

Be careful not to mess that up. Play Store Game For Pc. Before installing the new fan, clean all old thermal paste residue from the processor cover.

Do not use anything other than a clean lint-free cloth for this. Install the new fan, oriented so that the electrical connector can reach the mainboard plugin. Lock down the four screws, ensuring that the fan is centered over the CPU and has full flat contact to the CPU cover.

It is not a difficult process, but can be a bit scary for first timers. Be very careful not to let the screwdriver slip when pressing down. It could strike other mainboard components and damage the board. ALWAYS DO THIS KIND OF WORK WITH THE UNIT POWERED OFF AND UNPLUGGED. Answered on Dec 03, 2013. According to the specs, you have an Intel i7 CPU in a socket LGA 1366. You need a fan compatible with that socket and rated for that CPU.

The fan has an electrical connector to the mainboard that must be unplugged, then there are four spring-loaded locking screws that must be undone to lift the fan off the CPU. The replacement fan, if new, should already have thermal transfer compound on it.

Be careful not to mess that up. Before installing the new fan, clean all old thermal paste residue from the processor cover. Do not use anything other than a clean lint-free cloth for this. Install the new fan, oriented so that the electrical connector can reach the mainboard plugin.

Lock down the four screws, ensuring that the fan is centered over the CPU and has full flat contact to the CPU cover. It is not a difficult process, but can be a bit scary for first timers. Be very careful not to let the screwdriver slip when pressing down. It could strike other mainboard components and damage the board. ALWAYS DO THIS KIND OF WORK WITH THE UNIT POWERED OFF AND UNPLUGGED. Answered on Dec 03, 2013.